中文
CN
  • Water reducing and slump retaining polymers

    GK-FB Polycarboxylate Water Reducing and Slump Retention Admixture (Powder)

    Water reducing and slump retaining polymers

    未标题-1.jpg

    DESCRIPTION:GK-FB represents a high performance water reducing and slump retention admixture,based on Polycarboxylates. On the base of the molecule design principal, this agent grafts various active groups in the desired position of the main chain, in order to form the macro-molecule polymer. Thus it shows a superior spatial dispersion, high water reducing rate and long-term slump remaining ability

    USES:GK-FB is widely used in various dry premixed mortar and concrete, such as grouting agent, bearing mortar, waterproof mortar, floor mortar, etc, especially in cost-effective mortar products. Meanwhile, due to a kind of powder, it is suitable for long distance transport. 

    CHARACTERISTICS:GK-FB has advantages of following: * Improved workability of concrete and mortar; * Prolonged slump retention; * No negative effective on final strength of concrete; * No additional shrinkage.

    PRODUCT DATA:

    Chemical Base

    Organic polymer compound

    Appearance/Colour

    Powder/white to light yellow

    Packaging

    25kg plastic bags, single palette ( 1500kg)

    Storage conditions

    Store in dry conditions, protected from direct sunlight, water and frost

    Shelf-life

    At least 12 months if stored properly. If expired, it can only be used

    after inspection.

    Density (at 25C)

    1. 12— 1.20g/cm3

    pH Value (at 25°C)

    4—7

    Solid Content

    ≥ 98% (See CoA for details)

    Chloride Content

    ≤ 0. 1%

    Alkali content

    ≤ 2%


    APPLICATION

    RECOMMEND DOSAGE:

    0.3%—0.5% by weight of cementitious materials

    USING METHOD:Add GK-FB into dry powder mortar, and then mix evenly.

    NOTES ON APPLICATION

    1. GK-FB cannot be use on its own, but in combination with GK-3000.

    2.  GK-FB cannot be used in combination with naphthalene based water reducer or sulfamate based water reducers;

    3.  It can be combined with all other GK admixtures as following

    -    GK Polycarboxylate water reducer (powder)

    -    GK Pumping Agent

    -    GK Early Strength Agent.

    Since it is compatible with sulfate resistant cement, if combined with the above, it is       suggested to determine the performance experimentally or consult our technical services department.

    4.  If overdosed, the workability of concrete will be affected, but no additional air. GK-dispersion Agent can be used.

    BASIS OF PRODUCT DATA :All technical data stated in this Technical Data Sheet are based on standard laboratory tests.Actual measured data may vary due to circumstances beyond our control.

     LOCAL RESTRICTIONS : Please note that as a result of specific local regulations the declared data for this product may

    vary from country to country. Please consult the local Technical Data Sheet for the exact product data.

    HEALTH AND SAFETY :For information and advice on the safe handling, storage and disposal of chemical products,

    users should refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

    PROTECTIVE MEASURES:Avoid contact with skin. Please wash immediately with clear water when the product contacts

    skin and/or eyes. It should timely be taken medical treatment if any allergies and/or other adverse reactions happen.

    ECOLOGY/WASTE DISPOSAL:Do not dispose of into water or soil, but according to local regulations

    TRANSPORTATION CLASS:Non-hazardous

    TOXICITY:Non-toxic.

    DISCLAIMER:The information, and, in particular, the recommendations relating to the application and         end-use of Chang’An Yucai products, are given in good faith based on Chang’An Yucai’s     current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Chang’An Yucai’s recommendations. In              practice, the differences in materials, substrates and actual site conditions are such that no      warranty in respect of merchantability or of fitness for a particular purpose, nor any liability  arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the         product must test the product’s suitability for the intended application and purpose.                 Chang’An Yucai reserves the right to change the properties of its products. The proprietary   rights of third parties must be observed. All orders are accepted subject to our current terms   of sale and delivery. Users must always refer to the most recent issue of the local Technical   Data Sheet for the product concerned, copies of which will be supplied on request.